Learn How To Flash Your Android MTK Stock And Custom ROM




I have been receiving different complains, from many of my adherent readers on how to either flash their phone's Custom or Stock ROM. Therefore, I hereby bring these post to the public for others who also needs these tutorial on how to flash their android MTK phone. In these tuturial we will be making use of a great and user-friendly software called SP flash tool.

SP Flash Tool is a user-friendly tool designed for MediaTek devices like Tecno, Infinix, Innjoo, Gionee, BML, etc. SP Flash Tool is a great piece of software allows you to flash your Smartphones ROM (Stock or Custom). It supports flashing, Installing custom recovery, unbricking your bricked Smartphones and firmware updates for your Mediatek devices.

Requirements:

  • Android ADB drivers - Download it here.
  • Stock or Custom Rom you want to flash on your Smartphone.
  • Laptop or Desktop Computer.
  • USB Cable.
Step-By-Step Procedures:
  • Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (ignore this step 1, for phones with built in battery).
  • Now connect or reconnect the USB cable to the phone with the PC while the phone is still off, Windows should pop up and begin to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB Drivers correctly in Windows. After they successfully installed, disconnect the USB cable again. 
  • Extract SP Flash tool on your computer and launch it.
  • Open the folder you extract it to and locate flash_tool, double click on it to open. 
  • Once it is launched, hit the Scatter-loading button
  • Locate the scatter file in the backup or Rom of the phone that you downloaded. It's usually a text file. (Always only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable).
  • Hit the "Download' button in SP Flash Tool to begin the flashing process
  • Connect your Smartphone to the computer with a USB without battery, if possible to remove. Press, Vol Down or Up so that the computer can easily detect the phone.
  • Once the Flashing is complete you will see a green circle confirming... With Download OK
  • Close the SP Flash Tool and disconnect your phone from the computer. Congratulation, your Smartphone is now flashed with the new Stock Rom you downloaded. If your phone bootloops, remove battery and boot into recovery mode. Factory reset the phone. 
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! Always have a working backup of your original ROM before you flash a new unknown ROM. Entclass.com will take no responsibility for any harm done while attempting this!.

Credits: http://www.mokoshalb.com/2015/10/how-to-flash-mtk-android-phone-stock.html

Tap to Comment

Join Our Telegram Channel





About Entclass Blog Entclassblog.com Is A Top Tech Blog That Provides Free And Cheap Browsing Cheats On Mtn, 9mobile, Glo And Airtel, Tweaking Guides And Tech News.
Newer Posts Newer Posts Older Posts Older Posts

More posts

1 comment

Show Comments

After dropping your comment, keep calm, it may take minutes before it appears after moderation.

You want to get notified when i reply your comment? Kindly tick the "Notify Me" box.
  1. Wonderful information, this is good, thanks for the post.

    ReplyDelete